Griggio T220 HSK 63 E Spindle Moulder

Griggio T220 HSK 63 E Spindle Moulder


Brand: Griggio

Download Brochure: click to download pdf

click to download pdf



Griggio T220 HSK 63 E Spindle Moulder

The machine is equipped with:

·        HSK 63E shaft with quick change

·        Aluminium fence plates

·        Safety guard

·        Guard for working on the spindle

·        Inverter for rotation speed from 900-12000 rpm

·        Reverse spindle switch

·        No. 1 shaft with quick attachment HSK 63E

·        Table with adjustable sector

·        Suction dust hood dia. 120 mm.

·        ‘CE’ standards

* Electronic programmer with 2 axes SIEMENS touch screen with colour graphic video 7″ widescreen
* Automatic programming of the positioning of the fence in relation to the tool dia.
* Automatic vertical programming of the spindle
* Possibility to memorize up to 100 working programs on 2 axes with 10 heights each progam
* Possibility to memorize no. 200 tools
* 2 speeds manual positioning of the axes with quick memorizing key in the working program
* Automatic display of info and alarm messages
* Display of the spindle rotation speed
* Shaft sliding on re-circulating ball screw
* Automatic start through inverter
* In-feed displayed fence
* Adjustable overhead control panel board
* USB port on the adjustable overhead control panel board
* Support for the exclusion of the guide from the table

Working table sizes

1200×730

mm

Useful height with dia. 30-35 mm 1 1/4″ T 220

140

mm

Useful height with dia. 40-50 mm T 220

140

mm

Bottom stroke from the working table

90

mm

Top stroke from the working table

35

mm

Max. sizes of the tool reentering under the working table

320×90

mm

Cone connection dia.

48

mm

Cone locking strength

25.000

N

Cone height

32

mm

Cup depth of the working table

140

mm

Motor power

7,5 (5,5)

hp (kw)

Net weight

590

kg

Noise level

77-87

db(A)

TR -TENONING TABLE With tenoning guard
T-2 POS. TENONING SLIDING TABLE  -60°+60° turning carriage with tenoning guard
5-HEIGHT SETTING TURRET F/CARRIAGE(T-TR)  to program tenoning depth
TPL-NO. 2 PROLONGED TABLES
PL -NO. 1 PROLONGED TABLE
GUARD AGAINST THE RETURN OF THE PIECE – Installed either in infeed or outfeed working table
EXTRA SPINDLE HSK 63E  dia. 30-35-40-50 mm useful height 140 mm
EXTRA SPINDLE HSK 63E-ROUTING COLLET with collets 8-10-12-13 mm
EXTRA COLLET (dimensions available from 4 to 20 mm)
CARRIAGE TO SUPPORT TOOLS Complete with 2 racks and 10 supporting tools bushes
RACK TO SUPPORT TOOLS Complete with 5 supporting tools bushes
FENCE MOVING 80MM BEHIND THE SHAFT
‘AIGNER’ PLATENS FOR FENCE
INVERTER SPEED FROM 900 TO 12000RPM  VOLT 230
PROGRAM 12″ – ELECTRONIC PROGRAMMER SIEMENS touch screen with graphic colour video 12″ widescreen
GRL-BATTEN MAKER DEVICE “CE” FOR VERSIONS T-TR-TPL
complete with:
– Blade dia. 200 mm.
– Spindle dia. 30 mm.
– Spindle rotation speed 6000 r.p.m.
– Motor power 3 hp (kw 2,2)
– Turret vertical pneumatic adjustment
– Horizontal adjustment with handwheel
– Compulsory:
GA 8/68 feeder
No. 1 prolonged table for models T-TR,
Support for the exclusion of the batten maker device for models T-TR
SUPPORT FOR BATTEN MAKER EXCLUSION AND GUIDE EXCLUSION FROM THE WORKING TABLE
FEEDER SUPPORT F/COLUMN WITHOUT FEEDER
Complete with:
– displayed manual lifting
– manual transversal movement
– horizontal rod 1050mm dia. 58mm
(compulsory: overhead control panel)
PROGRAMMED LIFTING OF THE FEEDER SUPPORT – Compulsory: feeder support for overhead control panel
GM 4/34 FEEDER F/OVERHEAD CONTROL PANEL 3 rollers – 4 speeds – Complete with support to fix on the panel board column
GM 4/44 FEEDER F/OVERHEAD CONTROL PANEL 4 rollers – 4 speeds – Complete with support to fix on the panel board column
GM 4/38 FEEDER F/OVERHEAD CONTROL PANEL 3 rollers – 8 speeds – Complete with support to fix on the panel board column
GA 8/48 FEEDER F/OVERHEAD CONTROL PANEL 4 rollers – 8 speeds – Complete with support to fix on the panel board column
GA 8/68 FEEDER F/OVERHEAD CONTROL PANEL 6 rollers – 8 speeds – Complete with support to fix on the panel board column
GV 4 FEEDER F/OVERHEAD CONTROL PANEL 4 rollers – speed variator – Complete with support to fix on the panel board column
2ND CROSS SUPPORT (Recommended for GA 8/68)
MOTOR POWER 10 HP (7,5 KW) 50 HZ
MOTOR POWER 12 HP (9 KW) 60 HZ