Good News – Welcome to the team Sean

Good News from Maginn Machinery

“Our Growth/Expansion in uncertain times shows the strength of the Irish Woodworking Sector.”

Due to increasing demand from our customers for extraction and Bio-mass systems, our Operations Director Fintan Ryan has now fully dedicated his time to servicing this division of the business .

We welcome Sean O Sullivan in the role of Service Manager to ensure that all our customers maintain the service levels that have been established by Fintan over the years. Sean comes from a family of Field Service Engineers; Sean grew up in this industry and claims to have built his first motor control panel at the age of 12.

Sean’s career that began 1998 in one of Europe’s largest Joinery Manufacturers. He then joined Maginn Machinery in 2006 and in this time, he has become an expert on installing, servicing and training on all types of machines and models.

In 2016 Sean was promoted to a Senior Engineer position within the company. It is a natural progression therefore for Sean to move into the role of Service Manager while Fintan oversees the Biomass and extraction division.

Sean’s motto ,”If you’re not learning , you’re not living“.  The service team are familiar with Sean’s motto and our new members of the team will also be introduced to this customer-centric motto.

We also welcome Frank McKenna in the centre of Northern Ireland, Paul Flaherty in the west, Glen Keatley in the south east and  Eddie Sheehy as our representative in Munster to the Maginn team.

In recognition of the quality service system that has been built over the past four years, we are also delighted to confirm that Maginn Machinery received the great achievement of the Q mark for service in 2020.

We look forward to Sean taking on the role and developing our service area and customer solutions even further.   

Sean O’Sullivan – Service Manager

Benefits:

  • 11 Service Technicians
  • 32 County Cover
  • Helpline Support
  • Installation and Service
  • Email Support
  • 5 Regional Service Hubs
  • Over 20 years experience
  • Specialist Technicians
  • Emergency Call Out
  • In House Service
  • Customized Service System / Plans

Maginn’s and Woodmarque

Customers are extremely important within Maginn’s whether we are supplying large manufacturing solutions, Bio Dust Management, or consumables each transaction is as important as the other.

We asked Ronan Quinn, Managing Director of Woodmarque what were his thoughts on the recent work completed by Maginn’s, see below:

Woodmarque supply the Hospitality, Residential, Office & Retail sectors offering turn-key joinery solutions including fire doors, panelling, case goods, and specialist joinery to a range of clients in the construction sectors.”

“Woodmarque are currently undergoing a phased investment plan, we require a reliable supplier of wood machinery to create solutions to match our business demands. Our investment into will result in a 100,000 square feet factory, storage, R&D centre, and an apprenticeship key skills area. This expansion could result in the creation of 30 jobs a year over 5 years which is a boost to the local area providing exceptional opportunities for apprentices, graduates, and experienced professionals.

I have no hesitation in recommending Marc and the Maginn team.

Ronan Quinn, Managing Director, Woodmarque, Dungannon, NI

Marc from Maginn’s team is the project lead for the Woodmarque Project and when we asked him his thoughts this is what he had to say

We are delighted to be Woodmarque’s supplier of choice for their wood machinery requirements. All customers experience our expertise, innovation, customer service and our after sales support. We are constantly driving the standards and innovation up on every customer solution we provide.”

Marc, Director, Maginn’s Machinery

Take a look inside Woodmarque – play the video below


If you have a project no matter the size we have the machinery, the solution and the future proofing to ensure your solution is purely bespoke to your business requirements.

Get In Touch with us tel: +353 (0)1 4507930 or email info@maginn.ie, we are looking forward to helping your business. You can also view our range of machinery via our website Maginn.ie

About Woodmarque:

Woodmarqueis based in Dungannon and are one of the leading specialist fire door manufacturers in the UK and Ireland and has recorded significant growth over the last four years. Woodmarque which is owned and operated by the Quinn family was established in 1977 and currently employs 58 staff. This investment could see their workforce grow by 30 staff per annum over the next five years.

Tel 08456 728 005 | email info@woodmarque.co.uk | Web www.woodmarque.co.uk

We are Open with new COVID Policies

We hope you and yours are keeping well and safe during this difficult time.

 Maginn Machinery remains open as an essential supplier, but with some changes to our COVID 19 policies. 

As per Government instructions we are closing our showroom to the public and any collections of orders via website or phone must be completed via the stores. Please advise us when you will be collected so we have your order processed and ready for contactless collection. All personnel must wear a mask.

Our website is open 24/7 and deliveries will be completed as per normal.

Our showroom is now closed to the public but we can organise a virtual call with you should you wish to discuss and look at features of our machinery. 

Please be assured we are here to assist you with your queries and we hope you understand the change of COVID policies is for the safety of everyone.

Please contact us on +353 (0)1 4507930 or email info@maginn.ie

View the VIET Sanders @ Maginns

We have just taken delivery of some high quality VIET Sanders which are displayed in our showrooms.

Contact the Maginn Team to find out the benefits of adding this technology to your business.

Showroom is by appointment as per our COVID protocols.

You can find out more about each of the models available in the VIET range of sanders by clicking the model name below:

Contact us on +353 (0)1 4507930 or email info@maginn.ie

Biomass & Dust Extraction

Maginn Machinery enters into Phase 2 of the installation for Grady Joinery of their Biomass & Dust Extraction System.

The main goals of the product is provide:

  1. Cost Savings
  2. Save Money
  3. Increase the reduction of Grady Joinery’s Carbon Footprint

Watch the progress so far:

Contact a member of the Maginn team to find out how your business can save money, reduce costs and reduce your carbon footprint.

Vacuum Pods On Biesse Rover FT Machines

Vacuum Pods now available in Maginn’s for the Biesse Rover FT Machines.

The New Vacuum Pods can be positioned directly on the spoilboard avoiding any bulky connection hoses for auxiliary vacuum. The needles plates could be installed on the top and/or bottom surface of the pod to increase the piece friction and prevent movement or vibration during machining.

Some key benefits the new Vacuum Pods:

These Pods are an additional option on the Biesse Rover FT machines. Available for new machines but also can be fitted and used on already purchased Biesse Rover FT Machines.

Want to find out more ? Check out on the Video below or get in touch with the team in Maginns.

Call us on +353 (0)1 4507930 / Email info@maginn.ie

Visit our new website Maginn.ie

Maginn Machinery’s response to the latest restrictions

Maginn Machinery Company Ltd have closed our doors due to the latest announcement Closing all NON-Essential Businesses.

Thank you to our customers and employees for all your support.

Should you have an essential worker who needs Emergency Tooling or Spare Parts to complete an “Emergency Task” then we can supply you.

Please phone 01 – 4504111 for this emergency service from Maginn Machinery.

Stay Safe in these unprecedented times and we are looking forward to supplying you as soon as possible with a full service.

Call for Emergency Supply of Products or Service via +353 (0)1 4504111

Maginn Altendorf Installation a complete success!

Altendorf WA8X Installation.

WA8 Series

Maginn installed an Altendorf WA8X for Zelouf & Bell Design recently. There was great excitement when the machine was delivered.  Take a look at what our customer had to say.

Our Altendorf panel saw from Maginn Machinery …Declan and his tractor lift it into the workshop…such excitement!
Who will be the first to use it? The negotiations are in progress!
champagne upon delivery, but should we smash the bottle against the machine, or drink it?

Studio furniture makers Zelouf & Bell and their team of master craftsmen have been making museum-quality furniture in their workshop in rural Ireland since 1992. Their award-winning work is in private collections, public offices, embassy residences, churches and museums, at home and abroad.

We wish you the best of luck and continued success with your new Altendorf WA8X Machine. Find out more about Zelouf & Bell by clicking on the link below.

https://www.zeloufandbell.com/

WA 8X

WA 8 X Ergonomic: The Altendorf WA 8 X with three motorised axes. Number one for ease of operation and ergonomics: The eye level control panel of the Altendorf WA 8 X can be pivoted to the most convenient position for the operator. The rip fence is motorised.

Motorised rise/fall and tilt adjustment.

Motorised rise/fall and tilt adjustment of the main saw blade

Eye-level operating panel.

All major control functions are always visible. The panel pivots into the most convenient position and is accessible from both sides of the machine. Adjustment of both the saw blade and the rip fence are motorised.

Sliding table.

The Altendorf sliding table is renowned for its smooth and exact running. This is hallmark of an Altendorf, and it all comes down to design: the table runs on large dumb bell rollers sandwiched between hard chromed guide bars, guaranteeing absolute precision. The system’s large rollers ensure smooth action, meaning the table takes less effort to move and glides as securely as if it were on rails. This quality running will endure decades of heavy load bearing in the constant presence of dust and chips, and it needs virtually no maintenance. Each time the table moves, the brush fitted to the upper part automatically cleans the round guide bars. The system operates without any lubrication. The table’s hollow multi-chamber aluminium extrusion guarantees optimal torsion resistance and rigidity.

Motorised rip fence.

The motorised rip fence has a traverse speed of 250 mm/sec. and an accuracy of +/− 1/10 mm. The high precision five-point recirculating ball spindle system needs little maintenance and, along with the motor, is well protected by its integration into the aluminium profile. The fence automatically recognizes the position it’s in, especially when it reaches the danger area around the saw blade. It has an emergency cut-out to prevent the risk of crushing.

Crosscut fence.

The robustly mounted crosscut fence enables precise cutting of 90° angles. All settings are easy to read off the slanted scales. The flip stops are robust, free of play and are easy to slide individually along the full crosscutting range.

Saw unit.

The Altendorf saw unit is the engineering heart of all our saws. It is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly: this is because it is electronically balanced as a fully assembled unit, and extensive use is made of cast components. The high-precision vertical movement of the unit is linear with maintenance-free guide bearings. The robust tilt quadrants incorporate the traditional Altendorf tongue and groove connection system, which allows the whole unit to tilt easily and precisely to exactly the correct angle.

Contact Maginn today
Tel : 01 – 4504111
Email :
info@maginn.ie

Another successful installation completed by Maginn technicians recently.

Biesse Rover A 12/15 – 5 Axis

Maginn technicians recently installed a Second New Biesse Rover for Oikos.

Oikos are based in Harold’s Cross, Dublin 12. See more about Oikos by clicking here.


Oikos

Rover A is the new NC processing centre offering top performance and flexibility. It’s designed for the customer who wants to invest in a product that can process any type of element quickly and economically.

TOP-OF-THE-RANGE COMPONENTS
The new BH29 2L boring head is equipped with automatic lubrication and a highly efficient rigid suction cap for a cleaner environment. It’s liquid-cooled for maximum precision.

USER-FRIENDLY TECHNOLOGY
The 5-axis operating head, equipped with 13 kW HSD spindle and with 360° continuous rotation on the vertical and horizontal axes, enables the machining of complex-shapes ensuring quality, precision and absolute long term reliability.

Biesse machines are designed to work in complete safety.
Various solutions available:

With the new “full bumper” solution, the work table can be accessed from every side – this is the most ergonomic solution.
Solution with mats only, for speed and productivity.
Bumper plus photocells solution, combining productivity with ergonomics


 


Biesse Rover
Call Maginn Machinery today on 01-4504111 to discuss your requirements. Alternatively email info@maginn.ie


 

 

Maginn Installation of BIESSE BREMA EKO 2.2

Maginn had the pleasure of installing a NEW BIESSE BREMA EKO 2.2 for one of our customers recently.

Western Postform came to Maginn when they decided to upgrade their Machining Centre. With over 30 years’ experience in the business Western Postform offer bespoke solutions across many sectors including, Commercial Construction Sector, Pharmaceutical, Healthcare, leisure, education and Residential. Western Postform were delighted with their new machine and even more delighted with the lead time. Our experienced sales team were on hand to answer all questions that Western Postform had. We wish them all the best with their new machine!

western-postform-1
Find out more about Western Postform here :


www.westernpostform.ie

 

BIESSE BREMA EKO 2.2

Brema Eko 2.2 is the new compact and versatile vertical boring machine with reduced footprint, for machining panels of different thickness and sizes. The ideal solution for “just in time” production, even for the most complex routing machining processes.


Compact Power :

Brema vertical boring machines can carry out all boring, milling and glue and dowel insertion operations, as well as boasting the ability to manage additional hardware inserts. The structure of these machines has been designed to achieve optimal loading and unloading ergonomics, with a small footprint which saves 50% of space, in addition to offering zero set-up times and high levels of productivity.


MAXIMUM MACHINE CONFIGURABILITY, IN ACCORDANCE WITH PRODUCTION REQUIREMENTS


Cutting machine with integrated C-axis (optional)

The machine’s structure and components guarantee the highest level of precision for any type of machining operation.


MAXIMUM MANUFACTURING EFFICIENCY THANKS TO THE ELIMINATION OF SET-UP TIMES

Work table :
EKO-2.2

The work table is fitted with a counter pressure system that keeps the panel in position and perfectly aligned along its entire useful height, in accordance with the thickness of the machined piece, ensuring maximum precision.


Download Brochure Here…

 

Call Maginn today on 01-4504111 for more information. Alternatively you can email info@maginn.ie