New Machinery

CASADEI ALA 10 R Manual Trimming Machine

STANDARD EQUIPMENT

 Machine frame

  • Stability of machine ensured by steel mono-block frame.
  • Worktable covered with multi-layer anti-scratch phenolic material, with
  • modular holes and nylon inserts which can be positioned to support the
  • panels. (20 inserts are supplied with the machine).

Trimming unit equipped with:

  • two operating motors 0,55 kW complete of supporting carriages sliding on rectified guides
  • manual device for vertical opening of both motors in order to facilitate introduction of curved panels into the machine
  • horizontal adjustment of upper motor for trimming of panels with chamfered edge
  • vertical adjustment of upper motor to match the position according to panel thickness
  • Inverter 200 Hz, complete of electronic brake
  • integrated suction hood to maintain always a clean working table without hindering machining

 Copying device

Set of interchangeable, vertical copying device made of anti-scratch material, for optimal use of the machine. Machines supplied with two pairs of copying devices: a pair with three bearings for straight panels; a pair with single, big bearing for chamfered and shaped panels.  Easy and quick tolls adjustment by means of pivoting rings with decimal indication.  Front, interchangeable, rotating copying device with hardened, rectified and chromed surface. Standard supply of 5 different copying devices for easy and quick setting of the machine (R2 or R3 or chamfered or straight or tilted edge).

Technical Features

  • Edge thickness (max) 4 mm
  • panel width 100 mm
  • panel length 200 mm
  • Panel thickness 14 ÷ 80 mm
  • Internal min. radius 25 mm
  • Installed power 1,5 kW
  • Adjustable rotation speed 9.000 ÷ 15.000 g/min
  • Suction hood diameter 2×80 mm
  • Dimensions 1000x800x1400

Advantages

  • End cutting and top and bottom trimming of virtually any type of panel can be easily performed with the ALA 5 R universal trimming machine.
  • The trimming unit, with high frequency motors and inverter, can be equipped with combined cutter heads to trim straight or radius edges.
  • The micrometric displacement of the top head (standard) and the tilting table (optional) can be used to trim panels with angled edge up to 45°.
  • Trimming on round panels edged on the whole external perimeter can be achieved thanks to a convenient front foot pedal which opens the cutter heads.
  • Reliability: Straight panels can be end cut with absolute precision with the pneumatic end cutting unit available on request.
    The worktable of the ALA 5 R is equipped with relocatable nylon inserts to adapt it to the different panel shapes and sizes.

Our team of experts are available to provide you with any answers to your queries and what solution would best suit your business on +353 (0)1 450 4111 or email info@maginn.ie

Features

Stability of machine ensured by steel mono-block frame.

Manual device for vertical opening of both motors in order to facilitate introduction of curved panels into the machine.

Set of interchangeable, vertical copying device made of anti-scratch material, for optimal use of the machine.

Integrated suction hood to maintain always a clean working table without hindering machining.

Get in touch today

Get in Touch