New Machinery

Hoffman TFS 107 Spindle Moulder

Hoffman TFS 107 Spindle Moulder

“Best in low cost” – a lot of machine with a low price

100 % “made in Germany” the shaper captivates by a solid basic configuration at an interesting price: it offers a swivel range from -45,5° to +45,5°, motive positioning with LED displays, 7.5 kW engine with 4 speeds, clockwise / counterclockwise run of the spindle and much more. The perfect basis for reliable work.

Basic features

    • table size 1.200 x 815 mm, in ripped cast iron with a finest planed surface, table height 890 mm
    • table rings Ø 262 / 220 / 160 / 115 mm
    • tool Ø 250 / 200 / 140 / 100 / 65 mm
    • fixed moulding spindle with arbor (not changeable) Ø 30 mm with clamping nut “fix” (for a fast, comfortable tool changing without spindle locking); mounting length 140 mm
    • motorized height adjustment of the spindle up to ca. 145 mm, fast and slow run, LED display accurate to 1/10 mm, with change-over from the indication of absolute dimension to the incremental one
    • motorized tilt adjustment from – 45,5° to + 45,5°, fast and slow run, LED display accurate to 0,1°
    • motor 7,5 kW (10,0 HP) – 400 V, 50 Hz
    • 4 speeds 3.000 / 4.500 / 6.000 / 9.000 rpm through belt pulley
    • speed indication
    • electronicstarting and brakingdevice
    • left-/right-hand running mode; right-hand through two hand operation with warning indication
    • operating panel well-arranged in the machine base
    • fence type 2601 Efficient. Central fast adjustment through hand-wheel according digital read-out and fine adjustment of the infeed plate with cylinder rotary knob according scale to 0,1 mm with Multiplex plates. (after removing the fence the whole table is available for work · after reinstall a new calibration is NOT needed)
    • machine socket CEE-16A6h, fuse-protected, with plug for the feeder; on/off-switch in the operating panel
    • low maintenance machine
    • 2 extraction chute 120 mm Ø at the fence and below the table
    • electrical equipment in accordance to VDE/EN 60204 and EN848-1, contact for actuation of dust extraction system
    • accessories: chip collector and moulding guard TAPOA for the milling at the starting ring with extraction chute, HOFMANN guard and thrusting device “Centrex”, operating tools, press of grease, operating instruction

 

Call the team at Maginn Machinery on +353 (0)1 4507930 for more information

Features

Table size 1.200 x 815 mm, in ripped cast iron with a finest planed surface, table height 890 mm

Motorised height adjustment of the spindle up to ca. 145 mm, fast and slow run, LED display accurate to 1/10 mm, with change-over from the indication of absolute dimension to the incremental one

Swivel range from -45,5° to +45,5°

4 speeds, clockwise / counterclockwise run of the spindle

Rehnen PSM-1 Edge Brush Sander

The PSM-1 brush sanding machine can be used in many areas of wood surface processing. The great strength of the brush grinding machine lies above all in the grinding of molded parts
View Product

Rehnen R1 Edge Sander / Grinding

The RI is full of sophistication and would one of the top machines for edge sanding.  It has been designed for high end grinding and sanding work.
View Product

Rehnen Junior R1 Edge Sander

Rehnen Junior R1 Edge Sander - Edge Sander manufactured for enhanced user-friendliness.   Small, flexible all-rounder, can be swiveled 90 - 180 ° and a band height of 150mm.  Solid gray cast iron unit - long-lasting good grinding results
View Product
1 2 3 75

Get in touch today